TU814 or TU813 Base for AC800 I/O Cards

Any one used TU814 or TU813 base for AC800M I/O Cards with Pre-fabricated cables to termination unit.

We are planning for System upgrade replacing the existing Invensys system with 800XA+AC800M.

We are looking to keep the I/O base unit , and lay pre fabricated cable to termination units , so loop checking can be minimized.


Add New Comment


rajeeshpm   

asked 3 months ago
Closed



Answers

1

I am not exactly sure as to what information you are requesting here, so if you could provide more specific questions, I might be able to help. 


 


However, in response to your general question, yes, we have been using the TU813/TU814 bases on basically every project that we have done with customers since the early 2000s.  They work very well and we have had a great deal of success using them.  


 


Now, technically, you cannot order the TU813/TU814 with prefabricated cables, like you can for the TU812.  As you probably know, the TU813/TU814 are each provided with three Phoenix plug-in terminal blocks.  You then take the wire leads and attach a crimp on connector and plug the wire into the plug.  Now you will set up the plug based on the S800 module type being used and the wiring as indicated in the S800 manual.


 


Now, for applications like you are describing, if we could not wait for the S800 bases to come in with the terminal plugs, or the plugs were already being used, we would order the plugs from Phoenix separately and we would then fabricate wiring bundles based on what was required as far as module type and cable length.  We then pre-mount them to marshalling terminals and then simply plug them into the TU813/TU814 bases once they are mounted. 


 


The part numbers for the Phoenix Terminals are found in the S800 I/O Modules and Termination Units Manual (3BSE020924-600). 


 


The TU813 uses three Phoenix 1809792 (Alias: MSTBC 2.5/8/STZF-5.08) and has 8 Terminals/Plug


The TU814 uses three Phoenix 1808890 (Alias MSTBC 2.5/10-ST-5.08) and has 10 Terminals/Plug


 


The Wire Crimp used may be Phoenix 1879531, Phoenix 3190564 or Phoenix 3190551 - You need one crimp per wire being inserted to the terminal plug.




I hope that this information is useful.  If you have additional questions, please let me know.

murphyrd   

answered 3 months ago


 


By rajeeshpm on 1/21/2018 | Like (0) | Report

Is it possible for you to share a typical DI,DO,AI,AO wiring you have used, Can you please share to rajeeshpm@gmail.com


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask Sumit Gargav   

Rank: 3

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask kstoilov   

Rank: 11

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems


avatar
Ask Harsha.D   

Rank: 7

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask WvanWees   

Rank: 6

I'm a senior service engineer working for ABB in The Netherlands.


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Dieter Henkel   

Rank: 21


avatar
Ask Rob Lyon   

Rank: 2

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask Ronny Lindström   

Rank: 18

ABB Service Engineer


avatar
Ask nikismith   

Rank: 253

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.