System800xA OPC third party(KepserverEx) Problem

Dear Firends

We have ABB system800xA ver 5.1 as a DCS control system and siemens S7-300 as an package control system.We made connection between Siemens and ABB DCS by using third party opc server(kepserverEx) in system800xA.I have defined neccessery objects in control stracutre as you can see in attached pictures and in control builder.We have used property transfer for data exchange between two systems.The setting is ok and data transfering working ,but only i can read data in ABB that is sent by siemens and when I write in variable in ABB in logic it will not effect on variable in third party in Plant explorer and i dont have this value in siemens also.I means opc connection works only in one direction.As you see in attached pictures,two variable bbb2 ,bbb3 are readable and when i wirte values on these vaiable in siemens ,i get same value in ABB,but when I write in variable bbb4 in ABB I don't get this value in siemens.

It will be appreciated if can somebody help me.

Thanks

 1kep.PNG

 2kepcm.PNG

 3property_transfer.PNG

 4cm_moving.PNG


Add New Comment


takabi   

asked 2 months ago
Closed



Best Answer

1

Hi,

"Property Transfer" is a functionality one way direction.

Try to add a new "Property Transfer" aspect, in "Group1" object, with the proper expression.

I hope this could help you.

Best regards

Daniel Gil   

answered 2 months ago


 


By takabi on 10/10/2017 | Like (0) | Report

Thank you very much Mr.Gil
With your help,the problem solved.


By Daniel Gil on 10/10/2017 | Like (0) | Report

You are welcome!
Please, call me Daniel


By takabi on 10/10/2017 | Like (0) | Report

Hi Daniel
Thanks a lot again.
I had another question 1 month ago,but nobody could help me.It would be appreciated if you see this question also and give me your points.
The Title of question is:
ET200M IM153-2 Redundant Profibus connection to ABB AC800M(PM866)


Add New Comment


Answers

1

Hi,

"Property Transfer" is a functionality one way direction.

Try to add a new "Property Transfer" aspect, in "Group1" object, with the proper expression.

I hope this could help you.

Best regards

Daniel Gil   

answered 2 months ago


 


By takabi on 10/10/2017 | Like (0) | Report

Thank you very much Mr.Gil
With your help,the problem solved.


By Daniel Gil on 10/10/2017 | Like (0) | Report

You are welcome!
Please, call me Daniel


By takabi on 10/10/2017 | Like (0) | Report

Hi Daniel
Thanks a lot again.
I had another question 1 month ago,but nobody could help me.It would be appreciated if you see this question also and give me your points.
The Title of question is:
ET200M IM153-2 Redundant Profibus connection to ABB AC800M(PM866)


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask Dieter Henkel   

Rank: 23


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask Harsha.D   

Rank: 6

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask WvanWees   

Rank: 7

I'm a senior service engineer working for ABB in The Netherlands.


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Rob Lyon   

Rank: 3

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask Sumit Gargav   

Rank: 2

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask nikismith   

Rank: 270

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask kstoilov   

Rank: 15

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems