SuperView 930/960 - MasterPiece 2X0 and 200/1. Communication problems

A description of this resolution:
    Ensure that the MasterPiece 2X0 has a board with MasterView functions installed and that a MasterView is present in the same control network as the MasterPiece 2X0.

    For the MasterPiece 200/1, software with MasterView functions has to be installed to enable configuration and symbol name translation from SuperView. No MasterView needs to be present in the control network for MasterPiece 200/1.

    [ref FKP0339 VASMASOITA0827 ]

"SuperView 930/960 - MasterPiece 2X0 and 200/1. Communication problems" resolves the following:
    SuperView 930/960 - MasterPiece 2X0 and 200/1. Communication problems
    SuperView can’t do configuration and symbol name translation on objects defined in a MasterPiece (2X0 or 200/1) if software with MasterView functions is not installed in the MasterPiece.

    SuperView can’t do configuration and symbol name translation on objects defined in a MasterPiece 2X0 if a MasterView isn’t present in the control network.

    SuperView 930/960
    MasterPiece 2X0
    MasterPiece 200/1

    All versions of SuperView 930/960


Add New Comment


asked 11 years ago



Article was imported from the previous version of KnowledgeBank



answered 11 years ago


Add New Comment

Get weekly AKS updates

Partner Exclusive Webinars


> – Login to the partner portal to register

Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >

Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more

AKS Experts

Ask Dieter Henkel   

Rank: 21

Ask MMM   

Rank: 5

ABB PA CT Technical Support

Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.

Ask Harsha.D   

Rank: 7

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.

Ask nikismith   

Rank: 254

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.

Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.

Ask WvanWees   

Rank: 6

I'm a senior service engineer working for ABB in The Netherlands.

Ask Rob Lyon   

Rank: 2 I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.

Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.

Ask Sumit Gargav   

Rank: 3

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.

Ask Ronny Lindström   

Rank: 18

ABB Service Engineer

Ask kstoilov   

Rank: 11

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems