SdInReal ParError and AEError

Hello,

I have created my own library and inside library created functin block name AI_SD for him I used SDnReal function block. After donload I have Par and AE error.

Below is configuration:

PI_101.Latch := true;

PI_101.LevelHH := 16.0;

PI_101.AEConfigHH :=1;

PI_101.EnableHH :=true;

PI_101.LevelH :=14.0;

PI_101.AEConfigH :=1;

PI_101.EnableH :=true;

PI_101.LevelL :=-3.0;

PI_101.AEConfigL :=1;

PI_101.EnableL :=true;

PI_101.LevelLL :=-4.0;

PI_101.AEConfigLL :=1;

PI_101.EnableLL :=true;

PI_101.AEClass := 500;


Regards

 ai_sd.png


Add New Comment


tomas75   

asked 2 months ago
Closed



Answers

0

ParError is set, when any of your input value is out of range. Please check the input values.

AEError appears, when the internal status of the alarm module is negative, which means erroneous. Thus, the alarm/event is not generated because of some reason, it could be event queue is full. You can find some entries in online help.

Hint:

For ParError :- Check whether, LevelHH/LevelH/LevelLL/LeveL are within Input (In.Parameters.Max/Min) range.

AEConfigErr is within range of 1-4.

For AEError: Check for internal status code for Alarm and event generator module.

It could be either because of full queue, for status -11.

It could be because of invalid character being used in a string (like, using space), for status -30.

It could be your SourceName and ConditionName are not unique, if status is -710.

skhpatnaik   

answered 2 months ago


 


By tomas75 on 7/31/2017 | Like (0) | Report

Range is ok -10 to 30. I found inside SdInReal the SdRedundantIn block whitch has PArError True?? AI880 is configured as single


By skhpatnaik on 7/31/2017 | Like (0) | Report

If possible, share the screenshot of the editor


By tomas75 on 8/1/2017 | Like (0) | Report

Now it works good, but after these changes I made a cold restart to controller. Thanks a lot for help


Add New Comment


0

After writing the value to SRedundantIn ParError is false, that is OK

I find out that datatype initioal value was empty I thank that could cause alarms and errors. I try to test on test system

 InReal editor.png

 AI structure.png

tomas75   

answered 2 months ago


 


By skhpatnaik on 7/31/2017 | Like (0) | Report

Your ParErro problem is solved?
I still see AESevL is not within range, it is showing value = 0. Please read the parameter description to keep the input parameters within range.


By skhpatnaik on 7/31/2017 | Like (0) | Report

Check the 'Name' parameter whether it is empty or having illegal characters (even space is considered illegal), this would cause AEError.


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask nikismith   

Rank: 261

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask Dieter Henkel   

Rank: 23


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Rob Lyon   

Rank: 3

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask kstoilov   

Rank: 17

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems


avatar
Ask Sumit Gargav   

Rank: 2

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask Harsha.D   

Rank: 6

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.