Power supplies maintenance SA168, DSSA165, DSSR122

I have a customer who has different power supplies, DSSA165, SA168 and DSSR122 on the AC450.
According to the ABB document, all these are replaced every 10 years (if in a controlled environment). My problem is that they did not write a date when they were installed. Can I get the date from the rating plate about the power supply and how should I interpret it (look at pictures)?
Regards/ Anders


Add New Comment


asked 11 months ago



4D = probably 1994 April.

Try to get a view of the large electrolytes or transformer inside the DSSR122. They have production timestamps that will probably confirm 1994 or 2004.

Depending on load, ambient temp and roughness of the 24V feed the DSSR122 electrolytes may wear out prematurely. The electrolytes design life is 10 years as given by the producer, at nominal load and input.

The 24V riple shall not exceed 2.4V peak-to-peak (IEC 61131-2)

The 5V riple shall not exceed 0.2V peak-to-peak

Stefan Stromqvist   

answered 11 months ago


Add New Comment

Get weekly AKS updates

Partner Exclusive Webinars


> – Login to the partner portal to register

Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >

Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more

AKS Experts

Ask Rob Lyon   

Rank: 2

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.

Ask Sumit Gargav   

Rank: 3

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.

Ask nikismith   

Rank: 246

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.

Ask Harsha.D   

Rank: 7

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.

Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.

Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.

Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.

Ask Ronny Lindström   

Rank: 16

ABB Service Engineer

Ask MMM   

Rank: 5

ABB PA CT Technical Support

Ask kstoilov   

Rank: 11

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems

Ask Dieter Henkel   

Rank: 19

Ask WvanWees   

Rank: 6

I'm a senior service engineer working for ABB in The Netherlands.