MOD300 Download modbus settings

Hello!


We have AdvaBuild 3.7, AC460, redundant PM510V, CI532V02

We need to change Modbus address and port setting for a client.

If we change settings of MVIBOARD such as speed, parity etc, how we can download it into controller? We can compile and install AC460MOD object in AdvaBuild, but there is no option load or download in the drop down menu. Is it possible to check MVIBOARD settings online?

We have made RESET FOR UPGRADE in the Engineering Displays first for backup contrloller, then for primary, but changes don't applied.

We extract backup module from the rack and reset primary module, then after it became online, insert redundant module, see that changes are applied.

It's no good idea to reset both modules in the same time. May be exist other way to achieve good results?


We very need help!


Add New Comment


denis.sokhatskiy@ru.   

asked 2 months ago
Closed



Best Answer

1

Hi , you could try to change the parameters from ES Advabuild node then pull the MVIBOARD out and insert again and try if it does not work, you should compile , install and reset both processor modules because they should get the new parameters from advabuild node .

Regards

RAMA2   

answered 2 months ago


 


By denis.sokhatskiy@ru. on 10/13/2017 | Like (0) | Report

Hi
Thank you for answer
I can't find MVIBOARD in Engineering displays, it present only in Control Builder.
I must reset both modules in the same time?
Is any procedure for online downloading redundant controllers, without process interaption? It is a working plant


By RAMA2 on 10/14/2017 | Like (0) | Report

Hi ,try the following: do the modifications MVIPORT and station as you have mentioned ,then from the controller pull MVIBOARD card out and insert again
do the test , then if it does not work , compile , install at control module level then reset both processor modules at the same time , it will allow to controller module to get the new parameters from the ES Advabuild , I understand that you have mentioned that the plant is working , you should explain to the customer before doing anything.


By RAMA2 on 10/14/2017 | Like (0) | Report

The signals , loops , device loops are going to be down while the control modules are booting , Regards


Add New Comment


Answers

1

Hi , you could try to change the parameters from ES Advabuild node then pull the MVIBOARD out and insert again and try if it does not work, you should compile , install and reset both processor modules because they should get the new parameters from advabuild node .

Regards

RAMA2   

answered 2 months ago


 


By denis.sokhatskiy@ru. on 10/13/2017 | Like (0) | Report

Hi
Thank you for answer
I can't find MVIBOARD in Engineering displays, it present only in Control Builder.
I must reset both modules in the same time?
Is any procedure for online downloading redundant controllers, without process interaption? It is a working plant


By RAMA2 on 10/14/2017 | Like (0) | Report

Hi ,try the following: do the modifications MVIPORT and station as you have mentioned ,then from the controller pull MVIBOARD card out and insert again
do the test , then if it does not work , compile , install at control module level then reset both processor modules at the same time , it will allow to controller module to get the new parameters from the ES Advabuild , I understand that you have mentioned that the plant is working , you should explain to the customer before doing anything.


By RAMA2 on 10/14/2017 | Like (0) | Report

The signals , loops , device loops are going to be down while the control modules are booting , Regards


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask Rob Lyon   

Rank: 3

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask nikismith   

Rank: 270

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask Sumit Gargav   

Rank: 2

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask Dieter Henkel   

Rank: 23


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask Harsha.D   

Rank: 6

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask WvanWees   

Rank: 7

I'm a senior service engineer working for ABB in The Netherlands.


avatar
Ask kstoilov   

Rank: 15

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems