How to set IP in coupler0 in SDcard.ini

Hi I have a PM590 (FW ver 2.5) and i want create a SD card (from Automation Builder) to save my project and IPsettings in manner to restore it for maintenance puropuse.

How and where I have to write the IP address in the sdcard.ini file (in attachement)?

Thanks a lot.


Add New Comment


FabioPD   

asked 2 months ago
Closed



Answers

0

Hi Fabio

you can test the procedure that I have describe in one old post

http://www402.abbext.com/AC500-Project-backup-SD-card-q3371912.aspx#c
ommentsList3372294

If you have the SD card to test it you can verify if it's functioning also for the IP setting

IMHO the IP adress is not a part of sdcard.ini file contents

Hope this help you

Flavio Mussolin   

answered 2 months ago


 


By FabioPD on 7/24/2017 | Like (0) | Report

Hi Flavio I need to use only SD card to update the program and to configure the ethernet settings. I tried this month ago and was ok but now I don't remember how to do it exactly. I remember only it need to set Confdata=1....


By Flavio Mussolin on 7/24/2017 | Like (0) | Report

Hi Fabio
as far as I remember, the IP address is written in the program file that is then read by the CPU when booting from SD.
I do not think this address can be written to any parameter in the file sdcard.ini


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask MMM   

Rank: 4

ABB PA CT Technical Support


avatar
Ask kstoilov   

Rank: 17

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems


avatar
Ask Dieter Henkel   

Rank: 23


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask Sumit Gargav   

Rank: 2

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask nikismith   

Rank: 261

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask Harsha.D   

Rank: 6

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Flavio Mussolin   

Rank: 5

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask Rob Lyon   

Rank: 3

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.