Compact HMI System not getting Up after Power Failure.

Hello,

We have faced so many time below problem.

After Power Failure when we restar Computer System will not getin healthy. after deleting system and agin when we restore it it will run.

so what is the solution for this. because of this we loss all historical data. if any modification done during Engineering stage and this problem rise we lost all modified data.

This Problem accure in Compact HMI 5.1 and 6.0 version.


Add New Comment


MaheshDevaliya   

asked 4 months ago
Closed



Answers

0

Hi,

Please verify whether the SMData.dat database file is not close to 1KB.If this is the case after a power failure, then HMI service manager will not have a reference to the necessary services to be started.

I believe when the system is restored from the backup, the database file also gets restored and system gets enabled. Kindly use this as a starting point to trouble shoot.

Note: I am assuming this database file to be relevent even with Compact HMI800. The Screen shot is from an 800xA system.

Regards

Rahil

rahilmohammed   

answered 4 months ago


 


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask Rob Lyon   

Rank: 2

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask Ronny Lindström   

Rank: 18

ABB Service Engineer


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask Dieter Henkel   

Rank: 21


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask nikismith   

Rank: 254

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask Harsha.D   

Rank: 7

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask Sumit Gargav   

Rank: 3

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask kstoilov   

Rank: 11

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask WvanWees   

Rank: 6

I'm a senior service engineer working for ABB in The Netherlands.