CI502 PNIO

I have CI502 on the remote.How do we use the integrated counter fast counters 0& 1? I used CNT_IO but does not seem like it's working. Any projects demos related to CI502 would be highly appreciated!

 Counter1.PNG


Add New Comment


Robinson   

asked 9 days ago



Answers

1

Hi

you can find some example of application at the follow link:

http://www.abb.com/abblibrary/downloadcenter/?CategoryID=...

Hope this help you

Flavio Mussolin   

answered 9 days ago


 


By Robinson on 2/12/2018 | Like (0) | Report

Hi Flavio,

Thanks for the link but i do not see any application programming related to CI502-PNIO.I wanted to know how the counter is being used on this module and how it is set up?
Thanks


Add New Comment


0

Hi Rob

during configuration, the remote CI502 - I/O part - is the same that other I/O device...

you need assign in parameter device that the I/O is used as one fast counter and then assign in the I/O mapping the desired value.

In the examples that I have indicated you need to search one "fast counter" application.

Flavio Mussolin   

answered 8 days ago


 


By Robinson on 2/12/2018 | Like (0) | Report

Hi Flavio,
I have done that part. CI502 has DI8 AND DI9 AS FAST COUNTERS.
Do we need to use CNT_IO function Block?


By Robinson on 2/12/2018 | Like (0) | Report

I used the regular bit for fast counters but when i input the signal greater than 50hz, it does not keep up with the signal. i am missing counts. so i am supposed to use some function blocks like we use for AC500 ECO ONB_IO_CNT?


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask Rob Lyon   

Rank: 2

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask Harsha.D   

Rank: 7

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask kstoilov   

Rank: 11

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask nikismith   

Rank: 255

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask Ronny Lindström   

Rank: 18

ABB Service Engineer


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Sumit Gargav   

Rank: 3

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask Dieter Henkel   

Rank: 21


avatar
Ask WvanWees   

Rank: 6

I'm a senior service engineer working for ABB in The Netherlands.