800xA Faceplate

Dear ALL



we are using ac450 and 800xa 5.0 ,in our plant we have sequence and central mode for motor faceplate.



sequence mode is used for group start/stop and manual mode is for individual start/stop


here we are not using auto/MANUAL button.




i just want to control the motor faceplate changing from manual mode to sequence automatically , after some time or from Controller program bits .when the motor is in Central mode.




with regards



veko


Add New Comment


veko   

asked 2 months ago
Closed



Answers

0

Hallo,

if you check the definition of the Seq button (Config View of the Faceplate in the Object Type Structure), you will find that it sets the MORD_15 property. This property corresponds to the 15th bit of the :MORD terminal of the MOTCON database element. So setting this bit for one program cycle should do the job.

Please find attached program example, setting the SWITCH_TO_SEQ terminal will switch the motor to sequence mode.

 MOTCON to Seq.png

apz   

answered 2 months ago


 


By veko on 11/26/2017 | Like (0) | Report

I HAVE TESTED THE LOGIC ITS WORKING THANK YOU APZ


Add New Comment



Get weekly AKS updates


Partner Exclusive Webinars

 

> – Login to the partner portal to register



Points Redemption Program - Redeem your points for ABB training, Bluetooth speakers and mugs. Terms and conditions >


Earn points when you refer a friend
AKS Referral Program is "Live" - Learn more



AKS Experts


avatar
Ask nikismith   

Rank: 254

I have been a part of the Recording & Control Factory team for 17 years in total, having spent a number of years as a repairs technician withi the manufacturing department, but being in my current role for 9 years now.


avatar
Ask Flavio Mussolin   

Rank: 4

ABB AVP, Senior Electronic and Automation Engineer with over 30 years of experience in the field of process automation automotive, pharmaceutical, hollow glass, steel and rolling.


avatar
Ask MMM   

Rank: 5

ABB PA CT Technical Support


avatar
Ask Rob Lyon   

Rank: 2

info@lymac.co.nz I'm an independent DCS software and commissioning engineer with extensive experience in 800xA and other ABB products. I've worked in almost every corner of the world and still haven't seen it all.


avatar
Ask Ronny Lindström   

Rank: 18

ABB Service Engineer


avatar
Ask Harsha.D   

Rank: 7

Tech.Support,software and commisioning engineer with Proficient knowledge in 800xA and its products, RNRP,Networking in general.


avatar
Ask kstoilov   

Rank: 11

Control System Engineer: 800xA, Compact 800, AC500, AC31-50, Advant Master, Simatic, AC&DC Drives 11 years worked for ABB - Control Systems


avatar
Ask Govindaraj   

Rank: 10

Working in ABB India Operation Center. Have Project engineering and commissioning experience in ABB 800xA, Freelance, AC500.


avatar
Ask Sumit Gargav   

Rank: 3

I have worked with Freelance in majority, with 800xA FD and Melody system partly. Also had opportunity to work with Protocols - HART,Profibus,FF & Modbus.


avatar
Ask Stefan Stromqvist   

Rank: 1

I joined ABB in the year of 1994 and has since 1999 been working as a Service & Support Engineer at BU Control Technologies in Västerås, Sweden. My areas of expertise are: 800xA Base, 800xA for Advant Master, Information Management, operating systems, RNRP and Ethernet comms/networking in general.


avatar
Ask Dieter Henkel   

Rank: 21


avatar
Ask WvanWees   

Rank: 6

I'm a senior service engineer working for ABB in The Netherlands.